| Last Modified: 11-29-2007 | 1.6 J | |
| Service Category: Audio/Visual/Telematics | Section: Audio/Video | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM0000019NG056X |
| Title: AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: DESCRIPTION (2008 Sequoia) | ||
|
AVC-LAN Circuit |
DESCRIPTION
Each unit of the audio system connected to the AVC-LAN (communication bus) transfers the signal of each switch by communication.
When a short to +B or short to ground occurs in this AVC-LAN, the audio system will not function normally as the communication is discontinued.
INSPECTION PROCEDURE
PROCEDURE
|
1. |
INSPECT RADIO RECEIVER ASSEMBLY |
|
(a) Disconnect the I4 and I8* radio receiver assembly connectors. HINT:
*: w/ Rear Seat Entertainment System |
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
I4-5 (ATX+) - I4-15 (ATX-) |
Always |
60 to 80 Ω |
|
I8-9 (TXM+) - I8-10 (TXM-)* |
Always |
60 to 80 Ω |
HINT:
*: w/ Rear Seat Entertainment System
(c) Reconnect the radio receiver assembly connectors.
|
|
2. |
CHECK HARNESS AND CONNECTOR (RADIO RECEIVER - COMPONENT WHICH HAS STORED THIS CODE) |
HINT:
For details of the connectors, refer to "Terminals of ECU"
.
(a) Referring to the AVC-LAN wiring diagram below, check all AVC-LAN circuits.
(1) Disconnect all connectors in all AVC-LAN circuits.
(2) Check for an open or short in all AVC-LAN circuits.
OK:
There is no open or short circuit.
|
|
|